ph | 03 9729 3250 e | sales@psiautomation.com.au
ph | 03 9729 3250
e | sales@psiautomation.com.au
ph | 03 9729 3250 e | sales@psiautomation.com.au
ph | 03 9729 3250
e | sales@psiautomation.com.au
Engineered solutions to meet the diverse needs of various industries
Valves for any application, including:
Suitable for low head and zero head applications. Available in various seat materials including Viton (standard), Silicone, Neoprene, EPDM & Nitrile (contact us for any seals other than standard). Liquids to 40cst viscosity. Standard coil is weatherproof to IP65 and has LED illuminated plug.
Typical Applications include: Petrochemical, diesel farms, vacuum packaging, tank drain or low pressure service & general industry. Threads conform to ISO 7.1 Sealing Threads.
Features:
Size: 3/8″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Coupled Diaphragm
Body: Brass or 316 Stainless Steel
Seat: FKM
Pressure Range: 0 to 10 Bar
Media: Petrochemical
A high flow valve with a 316 Stainless Steel forged body and stainless steel operator. Suitable for low head and zero head applications.
Available in various seat materials including Viton (standard), Silicone, Neoprene, EPDM & Nitrile (contact us for any seals other than standard). Liquids to 40cst viscosity. Standard coil is weatherproof to IP65 and has LED illuminated plug.
Typical Applications include: Petrochemical, diesel farms, vacuum packaging, tank drain or low pressure service & general industry. Threads conform to ISO 7.1 Sealing Threads.
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Open (power to open)
Valve Operation: Coupled Diaphragm
Body: Brass or 316 Stainless Steel
Seat: FKM
Pressure Range: 0.5 to 10 Bar
Media: Petrochemical
A high flow and high pressure (to 80 Bar) piston type differential solenoid valve. Brass forged body with Teflon seats applicable for air and fluid up to 50 centistoke viscosity.
Comes with 100% duty rated encapsulated coil (grade H insulation) and LED din plug (IP65). Threads conform to ISO 7.1 Sealing Threads
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Servo Assisted
Body: Forged Brass
Seat: PTFE
Pressure Range: 0.5 to 80 Bar
Media: Non aggressive media
A high flow / high pressure (up to 20 Bar) normally closed (power to open) piston type valve with a 304 Stainless Steel body and Teflon seats.
Mainly used as a steam valve as it will do up to 180°C (steam at 10 Bar) with either a flying lead or DIN plug coil. Will handle fluids up to 50 centistoke viscosity.
Typical Applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry. Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Servo Assisted
Body: 304 Stainless Steel
Seat: PTFE
Pressure Range: 0.5 to 20 Bar
Media: Steam & High Pressure Air / Oil Media
A high flow / high pressure normally closed piston type valve with brass forged body and Teflon seats.
Mainly used as a steam valve as it will do up to 180 degrees Celsius with a DIN plug coil. Will handle fluids up to 50 centistoke viscosity.
Typical applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry.
Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.
Features:
Size: 3/8″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Servo Assisted
Body: Brass
Seat: PTFE
Pressure Range: 0.5 to 20 Bar (10 Bar Steam)
Media: Steam & High Pressure Air / Oil Media
A very high temperature normally closed piston type solenoid valve with a 304 Stainless Steel body and reinforced Teflon seats.
Mainly used for high temperature applications as it will do up to 200°C saturated steam and up to 225°C in other media such as hot oil. Will handle fluids up to 50 centistoke viscosity.
Typical applications include steam, laundry equipment, hot oil, steam curing beds, boilers & general industry.
Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Servo Assisted
Body: 304 Stainless Steel
Seat: RPTFE
Pressure Range: 0.5 to 25 Bar
Media: Steam, Hot Oil
A 316 Stainless Steel Normally Closed (power to open) Watermark approved solenoid valve.
Great for potable water or any application where watermark approval is required (mains water in Australia). Comes with IP65 weather proof LED illuminated din plug and coil.
Has a low pressure differential required making it suitable for applications such as rain water switch over and has a soft close design. Watermark Approval Licence Number WMK 26321 approved to WMTS 030:2016 – Solenoid Valves.
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Closed (power to open)
Valve Operation: Servo Assisted
Body: 316 Stainless Steel
Seat: EPDM
Pressure Range: 0.3 to 16 Bar
Media: Potable Water
A 316 Stainless Steel Normally Open (power to close) Watermark approved solenoid valve.
Great for potable water or any application where watermark approval is required (mains water in Australia). Comes with IP65 weather proof LED illuminated din plug and coil.
Has a low pressure differential required making it suitable for applications such as rain water switch over and features a soft close design. Watermark Approval Licence Number WMK 26321 approved to WMTS 030:2016 – Solenoid Valves.
Features:
Size: 1/2″ to 2″ BSP
Function: Normally Open (power to close)
Valve Operation: Servo Assisted
Body: 316 Stainless Steel
Seat: EPDM
Pressure Range: 0.25 to 16 Bar
Media: Potable Water
Suitable for industrial applications, options available in Brass and Stainless Steel (Plastic available upon request) to meet many applications.
Offering a wide range of seals and voltage configurations, to ensure compatibility with your system requirements.
Features:
Size: 1/4″ to 1″
Function: 2-Way Normally Closed, or Normally Open
Valve Operation: Pilot Operated
Body: Brass or Stainless Steel (Plastic available upon request)
Seat: NBR, FKM, EPDM
Pressure Range: Varies, see Data Sheet
Media: Air and Liquid
Contact us for more information
Contact us for more information
Suitable for industrial applications, options available in Brass and Stainless Steel to meet many applications.
Offering a wide range of seals and voltage configurations, to ensure compatibility with your system requirements.
Features:
Size: 1/8″ and 1/4″
Function: 2-Way, or 3-Way – Normally Closed, or Normally Open
Valve Operation: Direct Acting
Body: Brass or Stainless Steel
Seat: NBR, FKM, EPDM
Pressure Range: Varies, see Data Sheet
Media: Air and Liquid
Suitable for industrial applications, options available in Brass and Stainless Steel (Plastic available upon request) to meet many applications.
Operating with zero differential pressure
Offering a wide range of seals and voltage configurations, to ensure compatibility with your system requirements.
Features:
Size: 1/4″, 1/2″, 3/4″
Function: 2-Way Normally Closed, or Normally Open
Valve Operation: Pilot Operated
Body: Brass or Stainless Steel (Plastic available upon request)
Seat: NBR, FKM, EPDM
Pressure Range: Varies, see Data Sheet
Media: Air and Liquid
Contact us for more information
Contact us for more information
Available in a huge range of Voltages, Powers, and varieties of Connectors including LED DIN Plugs.
Suitable for: GEM-S, GEM-A, GEM-Z and more
Voltages: 12, 24, 48, 110, 120, 220, 230, 240 – AC and DC
Protection: IP65
Connection: All Coils come standard with a DIN Plug, optional LED DIN Plugs are available
